Drinks

Cherry Liqueur with the Thermomix®

Cherry liqueur made from cherry juice, brown sugar, vanilla sugar and white rum. Makes one batch of about 1 litre; allow cooling time in addition to the preparation steps.

Updated 5 November 2026
Jump to recipe Pin
Cherry Liqueur with the Thermomix®
Active
5 min
Total
15 min
Servings
1
Effort
Easy

Make this cherry liqueur with 600 g cherry juice, 140 g brown sugar, 2 sachets vanilla sugar and 350 g white rum. The recipe makes one batch of about 1 litre. Allow cooling time as well as the 15-minute preparation and heating estimate.

Cherry liqueur in a bottle and small glasses
Cherry liqueur in a bottle and small glasses

Use cherry juice

The measured recipe starts with cherry juice, so there is no fruit-stoning or puréeing step. Put the juice, brown sugar and vanilla sugar into the mixing bowl and heat for 10 minutes at 100 °C and speed 1.

Use small German-style vanilla sugar sachets, about 8 g each, as specified for this recipe. You can also prepare homemade vanilla sugar. The measured recipe calls for 2 sachets; it does not call for vanilla extract.

Cool to 60 °C before adding rum

Let the cherry mixture cool to 60 °C. Check the temperature rather than relying on a fixed waiting time. Add the 350 g white rum only after this cooling step and mix for 10 seconds at speed 4, with no further heating.

Prepare suitable bottles

Clean the bottles and lids thoroughly and use containers suitable for warm filling. Follow the bottle manufacturer’s cleaning instructions and take care with hot water and glass. Pour the finished liqueur into the prepared bottles, close them and allow to cool.

Serve chilled

Keep refrigerated until serving. The final yield can vary with heating and the ingredients, so about 1 litre is a guide. The recipe card’s nutrition entry covers the complete batch.

The notes mention vodka or Korn as alternatives. Use white rum for the measured base version. Label gift bottles with their contents and preparation date.

Recipe

Cherry Liqueur with the Thermomix®

by Daniela
kirschlikoer aus dem thermomix rezept
Print Pin
Cook mode: screen stays on
Servings
1 batch

Ingredients 0 / 4 ✓

  • 600 g cherry juice
  • 140 g brown sugar
  • 2 sachets vanilla sugar small German-style sachets, about 8 g each
  • 350 g white rum

Instructions 0 / 4

  1. 1

    Heat the juice and sugars.

    Put the cherry juice, brown sugar and vanilla sugar into the mixing bowl. Heat for 10 minutes/100 °C/speed 1. Allow the mixture to cool to 60 °C before the rum is added.

    • 600 g cherry juice
    • 140 g brown sugar
    • 2 sachets vanilla sugar
    kirschsaft im thermomix
  2. 2

    Prepare the bottles.

    Meanwhile, clean the bottles and lids thoroughly. Use heatproof bottles suitable for warm filling; rinse with boiling water only as permitted by their manufacturer and handle carefully.

    likoerflaschen sterilisieren
  3. 3

    Mix in the rum.

    Once the mixture has cooled to 60 °C, add the white rum and mix for 10 seconds/speed 4, with no further heating.

    • 350 g white rum
    kirschlikoer im thermomix
  4. 4

    Bottle and cool.

    Pour the liqueur into the prepared bottles, close them and allow to cool. Keep refrigerated until serving.

    kirschlikoer abfuellen
Tip.

Variation: The original notes mention vodka or Korn as alternatives to rum. The measured base recipe uses white rum. The nutrition entry covers the whole batch.

Nutrition per serving

1757
kcal
241g
Carbs
3g
Protein
220g
Sugar

Leave a Comment

Your email address will not be published. Required fields are marked *

Recipe Rating




Shopping list 0